summaryrefslogtreecommitdiff
path: root/dhall
diff options
context:
space:
mode:
Diffstat (limited to '')
l---------[-rw-r--r--]dhall_parser/src/dhall.abnf705
1 files changed, 1 insertions, 704 deletions
diff --git a/dhall_parser/src/dhall.abnf b/dhall_parser/src/dhall.abnf
index 847da02..ce13b8e 100644..120000
--- a/dhall_parser/src/dhall.abnf
+++ b/dhall_parser/src/dhall.abnf
@@ -1,704 +1 @@
-; ABNF syntax based on RFC 5234
-;
-; The character encoding for Dhall is UTF-8
-;
-; Some notes on implementing this grammar:
-;
-; First, do not use a lexer to tokenize the file before parsing. Instead, treat
-; the individual characters of the file as the tokens to feed into the parser.
-; You should not use a lexer because Dhall's grammar supports two features which
-; cannot be correctly supported by a lexer:
-;
-; * String interpolation (i.e. "foo ${Natural/toInteger bar} baz")
-; * Nested block comments (i.e. "{- foo {- bar -} baz -}")
-;
-; Second, this grammar assumes that your parser can backtrack and/or try
-; multiple parses simultaneously. For example, consider this expression:
-;
-; List ./MyType
-;
-; A parser might first try to parse the period as the beginning of a field
-; selector, only to realize immediately afterwards that `/MyType` is not a valid
-; name for a field. A conforming parser must backtrack so that the expression
-; `./MyType` can instead be correctly interpreted as a relative path
-;
-; Third, if there are multiple valid parses then prefer the first parse
-; according to the ordering of alternatives. That is, the order of evaluation
-; of the alternatives is left-to-right.
-;
-; For example, the grammar for single quoted string literals is:
-;
-; single-quote-continue =
-; "'''" single-quote-continue
-; / "${" complete-expression "}" single-quote-continue
-; / "''${" single-quote-continue
-; / "''"
-; / %x20-10FFFF single-quote-continue
-; / tab single-quote-continue
-; / end-of-line single-quote-continue
-;
-; single-quote-literal = "''" single-quote-continue
-;
-; ... which permits valid parses for the following code:
-;
-; "''''''''''''''''"
-;
-; If you tried to parse all alternatives then there are at least two valid
-; interpretations for the above code:
-;
-; * A single quoted literal with four escape sequences of the form "'''"
-; * i.e. "''" followed by "'''" four times in a row followed by "''"
-; * Four empty single quoted literals
-; * i.e. "''''" four times in a row
-;
-; The correct interpretation is the first one because parsing the escape
-; sequence "'''" takes precedence over parsing the termination sequence "''",
-; according to the order of the alternatives in the `single-quote-continue`
-; rule.
-;
-; Some parsing libraries do not backtrack by default but allow the user to
-; selectively backtrack in certain parts of the grammar. Usually parsing
-; libraries do this to improve efficiency and error messages. Dhall's grammar
-; takes that into account by minimizing the number of rules that require the
-; parser to backtrack and comments below will highlight where you need to
-; explicitly backtrack
-;
-; Specifically, if you see an uninterrupted literal in a grammar rule such as:
-;
-; "->"
-;
-; ... or:
-;
-; %x66.6f.72.61.6c.6c
-;
-; ... then that string literal is parsed as a single unit, meaning that you
-; should backtrack if you parse only part of the literal
-;
-; In all other cases you can assume that you do not need to backtrack unless
-; there is a comment explicitly asking you to backtrack
-;
-; When parsing a repeated construct, prefer alternatives that parse as many
-; repetitions as possible. On in other words:
-;
-; [a] = a / ""
-;
-; a* = a* a / ""
-;
-; Note that the latter rule also specifies that repetition produces
-; left-associated expressions. For example, function application is
-; left-associative and all operators are left-associative when they are not
-; parenthesized.
-;
-; Additionally, try alternatives in an order that minimizes backtracking
-; according to the following rule:
-;
-; (a / b) (c / d) = a c / a d / b c / b d
-
-; NOTE: There are many line endings in the wild
-;
-; See: https://en.wikipedia.org/wiki/Newline
-;
-; For simplicity this supports Unix and Windows line-endings, which are the most
-; common
-end-of-line =
- %x0A ; "\n"
- / %x0D.0A ; "\r\n"
-
-tab = %x09 ; "\t"
-
-block-comment = "{-" block-comment-continue
-
-block-comment-chunk =
- block-comment
- / %x20-10FFFF
- / tab
- / end-of-line
-
-block-comment-continue = "-}" / block-comment-chunk block-comment-continue
-
-not-end-of-line = %x20-10FFFF / tab
-
-; NOTE: Slightly different from Haskell-style single-line comments because this
-; does not require a space after the dashes
-line-comment = "--" *not-end-of-line end-of-line
-
-whitespace-chunk =
- " "
- / tab
- / end-of-line
- / line-comment
- / block-comment
-
-whsp = *whitespace-chunk
-
-; nonempty whitespace
-whsp1 = 1*whitespace-chunk
-
-; Uppercase or lowercase ASCII letter
-ALPHA = %x41-5A / %x61-7A
-
-; ASCII digit
-DIGIT = %x30-39 ; 0-9
-
-HEXDIG = DIGIT / "A" / "B" / "C" / "D" / "E" / "F"
-
-; A simple label cannot be one of the reserved keywords
-; listed in the `keyword` rule.
-; A PEG parser could use negative lookahead to
-; enforce this, e.g. as follows:
-; simple-label =
-; keyword 1*simple-label-next-char
-; / !keyword (simple-label-first-char *simple-label-next-char)
-simple-label-first-char = ALPHA / "_"
-simple-label-next-char = ALPHA / DIGIT / "-" / "/" / "_"
-simple-label = simple-label-first-char *simple-label-next-char
-
-quoted-label-char =
- %x20-5F
- ; %x60 = '`'
- / %x61-7E
-
-quoted-label = 1*quoted-label-char
-
-; NOTE: Dhall does not support Unicode labels, mainly to minimize the potential
-; for code obfuscation
-label = ("`" quoted-label "`" / simple-label)
-
-; A nonreserved-label cannot not be any of the reserved identifiers for builtins (unless quoted).
-; Their list can be found in semantics.md. This is not enforced by the grammar but
-; should be checked by implementations. The only place where this restriction applies
-; is bound variables.
-; A PEG parser could use negative lookahead to avoid parsing those identifiers.
-nonreserved-label = label
-
-; An any-label is allowed to be one of the reserved identifiers.
-any-label = label
-
-
-; Dhall's double-quoted strings are equivalent to JSON strings except with
-; support for string interpolation (and escaping string interpolation)
-;
-; Dhall uses almost the same escaping rules as JSON (RFC7159) with one
-; exception: Dhall adds a new `\$` escape sequence for dollar signs. This
-; additional escape sequences lets you escape string interpolation by writing
-; `\${`
-;
-; > The representation of strings is similar to conventions used in the C
-; > family of programming languages. A string begins and ends with
-; > quotation marks. All Unicode characters may be placed within the
-; > quotation marks, except for the characters that must be escaped:
-; > quotation mark, reverse solidus, and the control characters (U+0000
-; > through U+001F).
-; >
-; > Any character may be escaped. If the character is in the Basic
-; > Multilingual Plane (U+0000 through U+FFFF), then it may be
-; > represented as a six-character sequence: a reverse solidus, followed
-; > by the lowercase letter u, followed by four hexadecimal digits that
-; > encode the character's code point. The hexadecimal letters A though
-; > F can be upper or lower case. So, for example, a string containing
-; > only a single reverse solidus character may be represented as
-; > "\u005C".
-; >
-; > Alternatively, there are two-character sequence escape
-; > representations of some popular characters. So, for example, a
-; > string containing only a single reverse solidus character may be
-; > represented more compactly as "\\".
-; >
-; > To escape an extended character that is not in the Basic Multilingual
-; > Plane, the character is represented as a 12-character sequence,
-; > encoding the UTF-16 surrogate pair. So, for example, a string
-; > containing only the G clef character (U+1D11E) may be represented as
-; > "\uD834\uDD1E".
-double-quote-chunk =
- interpolation
- ; '\' Beginning of escape sequence
- / %x5C double-quote-escaped
- / double-quote-char
-
-double-quote-escaped =
- %x22 ; '"' quotation mark U+0022
- / %x24 ; '$' dollar sign U+0024
- / %x5C ; '\' reverse solidus U+005C
- / %x2F ; '/' solidus U+002F
- / %x62 ; 'b' backspace U+0008
- / %x66 ; 'f' form feed U+000C
- / %x6E ; 'n' line feed U+000A
- / %x72 ; 'r' carriage return U+000D
- / %x74 ; 't' tab U+0009
- / %x75 4HEXDIG ; 'uXXXX' U+XXXX
-
-; Printable characters except double quote and backslash
-double-quote-char =
- %x20-21
- ; %x22 = '"'
- / %x23-5B
- ; %x5C = "\"
- / %x5D-10FFFF
-
-double-quote-literal = %x22 *double-quote-chunk %x22
-
-; NOTE: The only way to end a single-quote string literal with a single quote is
-; to either interpolate the single quote, like this:
-;
-; ''ABC${"'"}''
-;
-; ... or concatenate another string, like this:
-;
-; ''ABC'' ++ "'"
-;
-; If you try to end the string literal with a single quote then you get "'''",
-; which is interpreted as an escaped pair of single quotes
-single-quote-continue =
- interpolation single-quote-continue
- / escaped-quote-pair single-quote-continue
- / escaped-interpolation single-quote-continue
- / single-quote-char single-quote-continue
- / "''" ; End of text literal
-
-; Escape two single quotes (i.e. replace this sequence with "''")
-escaped-quote-pair = "'''"
-
-; Escape interpolation (i.e. replace this sequence with "${")
-escaped-interpolation = "''${"
-
-single-quote-char =
- %x20-10FFFF
- / tab
- / end-of-line
-
-single-quote-literal = "''" end-of-line single-quote-continue
-
-interpolation = "${" complete-expression "}"
-
-text-literal = (double-quote-literal / single-quote-literal)
-
-; RFC 5234 interprets string literals as case-insensitive and recommends using
-; hex instead for case-sensitive strings
-;
-; If you don't feel like reading hex, these are all the same as the rule name.
-; Keywords that should never be parsed as identifiers
-if = %x69.66
-then = %x74.68.65.6e
-else = %x65.6c.73.65
-let = %x6c.65.74
-in = %x69.6e
-as = %x61.73
-using = %x75.73.69.6e.67
-merge = %x6d.65.72.67.65
-missing = %x6d.69.73.73.69.6e.67
-Infinity = %x49.6e.66.69.6e.69.74.79
-NaN = %x4e.61.4e
-Some = %x53.6f.6d.65
-
-; Unused rule that could be used as negative lookahead in the
-; `simple-label` rule for parsers that support this.
-keyword =
- if / then / else
- / let / in
- / using / missing / as
- / Infinity / NaN
- / merge / Some
-
-; Reserved identifiers, only needed for some special cases of parsing
-Optional = %x4f.70.74.69.6f.6e.61.6c
-Text = %x54.65.78.74
-List = %x4c.69.73.74
-
-combine = %x2227 / "/\"
-combine-types = %x2A53 / "//\\"
-prefer = %x2AFD / "//"
-lambda = %x3BB / "\"
-forall = %x2200 / %x66.6f.72.61.6c.6c
-arrow = %x2192 / "->"
-
-exponent = "e" [ "+" / "-" ] 1*DIGIT
-
-numeric-double-literal = [ "+" / "-" ] 1*DIGIT ( "." 1*DIGIT [ exponent ] / exponent)
-
-minus-infinity-literal = "-" Infinity
-plus-infinity-literal = Infinity
-
-double-literal =
- ; "2.0"
- numeric-double-literal
- ; "-Infinity"
- / minus-infinity-literal
- ; "Infinity"
- / plus-infinity-literal
- ; "NaN"
- / NaN
-
-natural-literal = 1*DIGIT
-
-integer-literal = ( "+" / "-" ) natural-literal
-
-; The implementation should recognize reserved names for builtins and treat them as special
-; values instead of variables.
-identifier = any-label [ whsp "@" whsp natural-literal ]
-
-; Printable characters other than " ()[]{}<>/\,"
-;
-; Excluding those characters ensures that paths don't have to end with trailing
-; whitespace most of the time
-path-character =
- ; %x20 = " "
- %x21
- ; %x22 = "\""
- ; %x23 = "#"
- / %x24-27
- ; %x28 = "("
- ; %x29 = ")"
- / %x2A-2B
- ; %x2C = ","
- / %x2D-2E
- ; %x2F = "/"
- / %x30-3B
- ; %x3C = "<"
- / %x3D
- ; %x3E = ">"
- ; %x3F = "?"
- / %x40-5A
- ; %x5B = "["
- ; %x5C = "\"
- ; %x5D = "]"
- / %x5E-7A
- ; %x7B = "{"
- / %x7C
- ; %x7D = "}"
- / %x7E
-
-quoted-path-character =
- %x20-21
- ; %x22 = "\""
- / %x23-2E
- ; %x2F = "/"
- / %x30-10FFFF
-
-unquoted-path-component = 1*path-character
-quoted-path-component = 1*quoted-path-character
-
-path-component = "/" ( unquoted-path-component / %x22 quoted-path-component %x22 )
-
-; The last path-component matched by this rule is referred to as "file" in the semantics,
-; and the other path-components as "directory".
-path = 1*path-component
-
-local =
- parent-path
- / here-path
- / home-path
- ; NOTE: Backtrack if parsing this alternative fails
- ;
- ; This is because the first character of this alternative will be "/", but
- ; if the second character is "/" or "\" then this should have been parsed
- ; as an operator instead of a path
- / absolute-path
-
-parent-path = ".." path ; Relative path
-here-path = "." path ; Relative path
-home-path = "~" path ; Home-anchored path
-absolute-path = path ; Absolute path
-
-; `http[s]` URI grammar based on RFC7230 and RFC 3986 with some differences
-; noted below
-
-scheme = %x68.74.74.70 [ %x73 ] ; "http" [ "s" ]
-
-; NOTE: This does not match the official grammar for a URI. Specifically:
-;
-; * this replaces `path-abempty` with `path`, so an empty path is
-; not valid
-; * this does not support fragment identifiers, which have no meaning within
-; Dhall expressions and do not affect import resolution
-http-raw = scheme "://" authority path [ "?" query ]
-
-; NOTE: Backtrack if parsing the optional user info prefix fails
-authority = [ userinfo "@" ] host [ ":" port ]
-
-userinfo = *( unreserved / pct-encoded / sub-delims / ":" )
-
-host = IP-literal / IPv4address / reg-name
-
-port = *DIGIT
-
-IP-literal = "[" ( IPv6address / IPvFuture ) "]"
-
-IPvFuture = "v" 1*HEXDIG "." 1*( unreserved / sub-delims / ":" )
-
-; NOTE: Backtrack when parsing each alternative
-IPv6address = 6( h16 ":" ) ls32
- / "::" 5( h16 ":" ) ls32
- / [ h16 ] "::" 4( h16 ":" ) ls32
- / [ *1( h16 ":" ) h16 ] "::" 3( h16 ":" ) ls32
- / [ *2( h16 ":" ) h16 ] "::" 2( h16 ":" ) ls32
- / [ *3( h16 ":" ) h16 ] "::" h16 ":" ls32
- / [ *4( h16 ":" ) h16 ] "::" ls32
- / [ *5( h16 ":" ) h16 ] "::" h16
- / [ *6( h16 ":" ) h16 ] "::"
-
-h16 = 1*4HEXDIG
-
-ls32 = ( h16 ":" h16 ) / IPv4address
-
-IPv4address = dec-octet "." dec-octet "." dec-octet "." dec-octet
-
-; NOTE: Backtrack when parsing these alternatives and try them in reverse order
-dec-octet = DIGIT ; 0-9
- / %x31-39 DIGIT ; 10-99
- / "1" 2DIGIT ; 100-199
- / "2" %x30-34 DIGIT ; 200-249
- / "25" %x30-35 ; 250-255
-
-reg-name = *( unreserved / pct-encoded / sub-delims )
-
-pchar = unreserved / pct-encoded / sub-delims / ":" / "@"
-
-query = *( pchar / "/" / "?" )
-
-pct-encoded = "%" HEXDIG HEXDIG
-
-unreserved = ALPHA / DIGIT / "-" / "." / "_" / "~"
-
-sub-delims = "!" / "$" / "&" / "'" / "(" / ")" / "*" / "+" / "," / ";" / "="
-
-http =
- http-raw
- [ whsp using whsp1 (import-hashed / "(" whsp import-hashed whsp ")") ]
-
-; Dhall supports unquoted environment variables that are Bash-compliant or
-; quoted environment variables that are POSIX-compliant
-env = "env:"
- ( bash-environment-variable
- / %x22 posix-environment-variable %x22
- )
-
-; Bash supports a restricted subset of POSIX environment variables. From the
-; Bash `man` page, an environment variable name is:
-;
-; > A word consisting only of alphanumeric characters and under-scores, and
-; > beginning with an alphabetic character or an under-score
-bash-environment-variable = (ALPHA / "_") *(ALPHA / DIGIT / "_")
-
-; The POSIX standard is significantly more flexible about legal environment
-; variable names, which can contain alerts (i.e. '\a'), whitespace, or
-; punctuation, for example. The POSIX standard says about environment variable
-; names:
-;
-; > The value of an environment variable is a string of characters. For a
-; > C-language program, an array of strings called the environment shall be made
-; > available when a process begins. The array is pointed to by the external
-; > variable environ, which is defined as:
-; >
-; > extern char **environ;
-; >
-; > These strings have the form name=value; names shall not contain the
-; > character '='. For values to be portable across systems conforming to IEEE
-; > Std 1003.1-2001, the value shall be composed of characters from the portable
-; > character set (except NUL and as indicated below).
-;
-; Note that the standard does not explicitly state that the name must have at
-; least one character, but `env` does not appear to support this and `env`
-; claims to be POSIX-compliant. To be safe, Dhall requires at least one
-; character like `env`
-posix-environment-variable = 1*posix-environment-variable-character
-
-; These are all the characters from the POSIX Portable Character Set except for
-; '\0' (NUL) and '='. Note that the POSIX standard does not explicitly state
-; that environment variable names cannot have NUL. However, this is implicit
-; in the fact that environment variables are passed to the program as
-; NUL-terminated `name=value` strings, which implies that the `name` portion of
-; the string cannot have NUL characters
-posix-environment-variable-character =
- %x5C ; '\' Beginning of escape sequence
- ( %x22 ; '"' quotation mark U+0022
- / %x5C ; '\' reverse solidus U+005C
- / %x61 ; 'a' alert U+0007
- / %x62 ; 'b' backspace U+0008
- / %x66 ; 'f' form feed U+000C
- / %x6E ; 'n' line feed U+000A
- / %x72 ; 'r' carriage return U+000D
- / %x74 ; 't' tab U+0009
- / %x76 ; 'v' vertical tab U+000B
- )
- ; Printable characters except double quote, backslash and equals
- / %x20-21
- ; %x22 = '"'
- / %x23-3C
- ; %x3D = '='
- / %x3E-5B
- ; %x5C = "\"
- / %x5D-7E
-
-import-type = missing / local / http / env
-
-hash = %x73.68.61.32.35.36.3a 64HEXDIG ; "sha256:XXX...XXX"
-
-import-hashed = import-type [ whsp hash ]
-
-; "http://example.com"
-; "./foo/bar"
-; "env:FOO"
-import = import-hashed [ whsp as whsp1 Text ]
-
-expression =
- ; "\(x : a) -> b"
- lambda whsp "(" whsp nonreserved-label whsp ":" whsp1 expression whsp ")" whsp arrow whsp expression
-
- ; "if a then b else c"
- / if whsp1 expression whsp then whsp1 expression whsp else whsp1 expression
-
- ; "let x : t = e1 in e2"
- ; "let x = e1 in e2"
- ; "let x = e1 let y = e2 in e3"
- / 1*let-binding in whsp1 expression
-
- ; "forall (x : a) -> b"
- / forall whsp "(" whsp nonreserved-label whsp ":" whsp1 expression whsp ")" whsp arrow whsp expression
-
- ; "a -> b"
- ;
- ; NOTE: Backtrack if parsing this alternative fails
- / operator-expression whsp arrow whsp expression
-
- ; "merge e1 e2 : t"
- ; "merge e1 e2"
- / merge whsp1 import-expression whsp import-expression [ whsp ":" whsp1 application-expression ]
-
- ; "[] : List t"
- ; "[] : Optional t"
- ; "[x] : Optional t"
- ;
- ; NOTE: Backtrack if parsing this alternative fails since we can't tell
- ; from the opening bracket whether or not this will be an empty list or
- ; a non-empty list
- / "[" whsp (empty-collection / non-empty-optional)
-
- ; "x : t"
- / annotated-expression
-
-; Nonempty-whitespace to disambiguate `env:VARIABLE` from type annotations
-annotated-expression = operator-expression [ whsp ":" whsp1 expression ]
-
-; "let x = e1"
-let-binding = let whsp1 nonreserved-label whsp [ ":" whsp1 expression whsp ] "=" whsp expression whsp
-
-; "] : List t"
-; "] : Optional t"
-empty-collection = "]" whsp ":" whsp1 (List / Optional) whsp import-expression
-
-; "x] : Optional t"
-non-empty-optional = expression whsp "]" whsp ":" whsp1 Optional whsp import-expression
-
-operator-expression = import-alt-expression
-
-; Nonempty-whitespace to disambiguate `http://a/a?a`
-import-alt-expression = or-expression *(whsp "?" whsp1 or-expression)
-or-expression = plus-expression *(whsp "||" whsp plus-expression)
-; Nonempty-whitespace to disambiguate `f +2`
-plus-expression = text-append-expression *(whsp "+" whsp1 text-append-expression)
-text-append-expression = list-append-expression *(whsp "++" whsp list-append-expression)
-list-append-expression = and-expression *(whsp "#" whsp and-expression)
-and-expression = combine-expression *(whsp "&&" whsp combine-expression)
-combine-expression = prefer-expression *(whsp combine whsp prefer-expression)
-prefer-expression = combine-types-expression *(whsp prefer whsp combine-types-expression)
-combine-types-expression = times-expression *(whsp combine-types whsp times-expression)
-times-expression = equal-expression *(whsp "*" whsp equal-expression)
-equal-expression = not-equal-expression *(whsp "==" whsp not-equal-expression)
-not-equal-expression = application-expression *(whsp "!=" whsp application-expression)
-
-; Import expressions need to be separated by some whitespace, otherwise there
-; would be ambiguity: `./ab` could be interpreted as "import the file `./ab`",
-; or "apply the import `./a` to label `b`"
-application-expression =
- [ Some whsp1 ] import-expression *(whsp1 import-expression)
-
-import-expression = import / selector-expression
-
-; `record.field` extracts one field of a record
-;
-; `record.{ field0, field1, field2 }` projects out several fields of a record
-;
-; NOTE: Backtrack when parsing the `*("." ...)`. The reason why is that you
-; can't tell from parsing just the period whether "foo." will become "foo.bar"
-; (i.e. accessing field `bar` of the record `foo`) or `foo./bar` (i.e. applying
-; the function `foo` to the relative path `./bar`)
-selector-expression = primitive-expression *(whsp "." whsp selector)
-
-selector = any-label / labels
-
-labels = "{" whsp [ any-label whsp *("," whsp any-label whsp) ] "}"
-
-; NOTE: Backtrack when parsing the first three alternatives (i.e. the numeric
-; literals). This is because they share leading characters in common
-primitive-expression =
- ; "2.0"
- double-literal
-
- ; "2"
- / natural-literal
-
- ; "+2"
- / integer-literal
-
- ; '"ABC"'
- / text-literal
-
- ; "{ foo = 1 , bar = True }"
- ; "{ foo : Integer, bar : Bool }"
- / "{" whsp record-type-or-literal whsp "}"
-
- ; "< Foo : Integer | Bar : Bool >"
- ; "< Foo : Integer | Bar = True | Baz : Bool >"
- ; "< Foo | Bar : Bool >"
- / "<" whsp union-type-or-literal whsp ">"
-
- ; "[1, 2, 3]"
- ; `empty-collection` handles empty lists
- / non-empty-list-literal
-
- ; "x"
- ; "x@2"
- / identifier
-
- ; "( e )"
- / "(" complete-expression ")"
-
-record-type-or-literal =
- empty-record-literal
- / non-empty-record-type-or-literal
- / empty-record-type
-
-empty-record-literal = "="
-empty-record-type = ""
-
-non-empty-record-type-or-literal =
- any-label whsp (non-empty-record-literal / non-empty-record-type)
-
-non-empty-record-type = ":" whsp1 expression *(whsp "," whsp record-type-entry)
-record-type-entry = any-label whsp ":" whsp1 expression
-
-non-empty-record-literal = "=" whsp expression *(whsp "," whsp record-literal-entry)
-record-literal-entry = any-label whsp "=" whsp expression
-
-union-type-or-literal =
- non-empty-union-type-or-literal
- / empty-union-type
-
-empty-union-type = ""
-
-non-empty-union-type-or-literal =
- any-label [ whsp ( union-literal-variant-value / union-type-or-literal-variant-type) ]
-
-; = True | ...
-union-literal-variant-value = "=" whsp expression *(whsp "|" whsp union-type-entry)
-union-type-entry = any-label whsp ":" whsp1 expression
-
-; : Integer | ...
-; | ...
-union-type-or-literal-variant-type = [ ":" whsp1 expression ] [ whsp "|" whsp non-empty-union-type-or-literal ]
-
-
-non-empty-list-literal = "[" whsp expression whsp *("," whsp expression whsp) "]"
-
-; This just adds surrounding whitespace for the top-level of the program
-complete-expression = whsp expression whsp
+../../dhall-lang/standard/dhall.abnf \ No newline at end of file